Setting up a new Medical Clinic or Consultation Room?
Are you Leasing or is it expensive to Plumb?
The Medi-sink provides world class hand washing facilities at the point of need.
How does it work?
Fresh water is stored in a sealed container located within the unit. When the sensor is activated, the unit will draw water from the fresh water tank, heat it on demand to 40 C and then give you a 10 second warm water rinse to wash your hands. The waste water then goes through the drain and is stored hygienically in the waste water compartment of the container to be emptied daily or weekly.
Do I need plumbing?
No. The Medi-Sink is fully self-contained and requires no access to mains plumbing. The standard 10 litre tank delivers 50 hand washes per filling, and the optional 20 litre containers deliver 100 hand washes per filling. Once the fresh has been used and the waste is full, simply empty the waste water into a suitable drain (toilet or other sink connected to mains), re-fill the fresh water compartment and re-connect the tanks to the unit. It’s that easy.
How do I install it?
The Medi-sink requires no installation. We ship to your door, all you have to do is remove the unit from the box, position it where desired, fill the tank with water and plug the unit into power. It is then ready to wash hands. Easy to operate and clean, the Medi-Sink blends seamlessly into your room.